Nissan Altima (L32) 2007-2012 Service Manual: Diagnosis system (BCM)
Diagnosis Description
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE: It can perform the diagnosis modes except the following for all sub system selection items.
CONSULT-III Function
ECU IDENTIFICATION
Displays the BCM part No.
SELF-DIAG RESULT
Refer to BCS-91, "DTC Index".
RETAINED PWR
CONSULT-III Function (BCM - RETAINED PWR)
Data monitor
Power window system
System Diagram
POWER WINDOW ANTI-PINCH SYSTEM
System Description
POWER WINDOW MAIN SWITCH
INPUT/OUTPUT SIGNAL CHART
POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
INPUT/OUTPUT SIGNAL CHART
POWE ...
Other materials:
P0182, P0183 FTT Sensor
Description
The fuel tank temperature sensor is used to detect the fuel temperature
inside the fuel tank. The sensor modifies a voltage signal from
the ECM. The modified signal returns to the ECM as the fuel temperature
input. The sensor uses a thermistor which is sensitive to the
change in te ...
P2127, P2128 APP Sensor
Description
The accelerator pedal position sensor is installed on the upper end
of the accelerator pedal assembly. The sensor detects the accelerator
position and sends a signal to the ECM.
Accelerator pedal position sensor has two sensors. These sensors
are a kind of potentiometer which tran ...
Water pump
Removal and Installation
1. Water pump
2. O-rings
WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could occur
from high pressure
coolant escaping from the radiator.
CAUTION:
• When removing water pump assembly, be careful not to get coolant on drive
belt.
...
