Nissan Altima 2007-2012 Service Manual: Diagnosis system (ECM)

CONSULT-III Function

CONSULT-III APPLICATION ITEMS

CONSULT-III can display each diagnosis item using the diagnosis test modes shown following.

DATA MONITOR

Display Item List

    Air conditioner control
    System Diagram CONTROL SYSTEM The control system consists of input sensors, switches, front air control and outputs. The relationship of these components is shown in the figure below: System ...

    Component diagnosis
    ...

    Other materials:

    TCM branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side). - TCM - Harnes ...

    P0845 transmission fluid pressure sensor B (pri pressure sensor)
    Description The transmission fluid pressure sensor B (primary pressure sensor) detects primary pressure of CVT and sends TCM the signal. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE NOTE: If “DTC CONFIRMATION PROCEDURE” has been previously performed, always turn igniti ...

    POWER STEERING OIL PUMP
    Inspection RELIEF OIL PRESSURE CAUTION: Make sure that belt tension is normal before starting the following procedure. 1. Connect the Tool between oil pump discharge connector and high-pressure hose. Bleed air from the hydraulic circuit while opening valve fully. Refer to ST-8, "Inspectio ...