Nissan Altima (L32) 2007-2012 Service Manual: Disassembly and assembly
TORQUE CONVERTER AND CONVERTER
HOUSING OIL SEAL
Exploded View
1. CVT assembly
2. Converter housing oil seal
3. Torque converter
Apply CVT Fluid. Refer to MA-12,
"Fluids and Lubricants".
Disassembly
1. Remove torque converter.
2. Remove the converter housing oil seal using suitable tool.
CAUTION:
Do not scratch converter housing.
Assembly
1. Drive the converter housing oil seal in evenly using suitable tool.
CAUTION:
• Do not reuse converter housing oil seal.
• Apply CVT fluid to converter housing oil seal.
2. Install the torque converter.
TRANSAXLE ASSEMBLY
Exploded View
1. Air breather hose
2. CVT fluid level gauge
3. CVT fluid charging pipe
4. O-ring
5. Copper washer
6. Fluid cooler tube
7. Fluid cooler tube
8. CVT assemb ...
General Specification
CAUTION:
• Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluid.
• Using CVT fluid other than Genuine NISSAN CVT Fluid NS-2 will deteriorate in
drivea ...
Other materials: Front power seat adjustment
(if so equipped)
Operating tips
The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 seconds
then reactivate the switch.
Do not operate the power seat switch for
a long period of time when the engine is
off. This will discharge the battery.
For add ...
Warning lights, indicator lights and audible
reminders
Warning/Indicator light (red)
Brake warning light
Charge warning light
Electronic parking brake
indicator
light (if so equipped)
Engine oil pressure warning
light
Master warning light
Seat belt warning light and
chime
Security indicator light
Supplemental air bag warning
light
Warning/Indic ...
Air bags, seat belts and child restraints
Top tether strap anchor
Rear seat belts with pretensioner(s) for
outboard seating
Roof-mounted curtain side-impact and
rollover supplemental air bag
Front seat-mounted side-impact
supplemental air bag
Head restraints/headrests
Front seat belt with pretensioner(s) and
shoulder height adju ...