Nissan Altima (L32) 2007-2012 Service Manual: Disassembly and assembly
Hydraulic line
QR25DE : Exploded View
CAUTION:
Securely insert harness connector to pressure sensor.
1. Reservoir tank
2. Reservoir tank bracket
3. Suction hose
4. High-pressure hose
5. Oil pump assembly
6 ...
Steering column
Disassembly and Assembly
CAUTION:
• Any time the ignition switch has been disconnected, removed or installed, the
keys must be re-registered
in the BCM. Refer to Consult-III operations IVIS/NVI ...
Other materials:
Supplemental air bag warning light
The supplemental air bag warning light,
displaying in the instrument panel,
monitors
the circuits for the air bag systems, pretensioners
and all related wiring.
When the ignition is placed in the ON or START
position, the supplemental air bag warning light
illuminates for about 7 second ...
Vehicle information display warnings
and indicators
The following messages may appear in
your vehicle information display.
Place the key near the start
switch
This indicator appears when the battery of
the Intelligent Key is low and when the Intelligent
Key system and the vehicle are not
communicating normally.
If this appears, touch the ignition s ...
ECM branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the following terminals and connectors for damage, bend and loose
connection (unit side and connector
side).
- ECM
- Harnes ...
