Nissan Altima (L32) 2007-2012 Service Manual ≻ Power window control system lh&rh front anti-pinch-sedan ≻ Symptom diagnosis ≻ Does not operate by key cylinder switch

Nissan Altima (L32) 2007-2012 Service Manual: Does not operate by key cylinder switch

Diagnosis Procedure

1. PERFORM INITIALIZATION PROCEDURE

Perform initialization procedure.

Refer to PWC-295, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement".

Is the inspection result normal? YES >> GO TO 2

NO >> Repair or replace the malfunctioning parts.

2. CHECK FRONT DOOR LOCK ASSEMBLY LH (KEY CYLINDER SWITCH)

Check front door lock assembly LH (key cylinder switch).

Refer to PWC-328, "Component Function Check".

Is the inspection result normal? YES >> Inspection end.

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

Power window retained power operation does not operate properly

Diagnosis Procedure 1. CHECK FRONT DOOR SWITCH Check front door switch. Refer to PWC-326, "Component Function Check". Is the inspection result normal? YES >> Inspection end. ...

Keyless power window down does not operate

Diagnosis Procedure 1. CHECK INTELLIGENT KEY FUNCTION Check Intelligent Key function. Refer to DLK-340, "Component Function Check". Is the inspection result normal? YES >> Ch ...

Other materials:

Resetting the drive computer
The drive computer is divided across three screens: Speed Trip Distance & Time Fuel Economy 1. Press the or buttons until the desired drive computer screen is displayed. 2. Press the OK button to bring up the drive computer Reset menu. 3. Use the or to select the desired option. Then press ...

ProPILOT Assist switches
DISTANCE switch: Long Middle Short RES+ switch: Resumes set speed or increases speed incrementally CANCEL switch: Deactivates the ProPILOT Assist system ProPILOT Assist switch: Turns the ProPILOT Assist system on or off SET- switch: Sets desired cruise speed or reduces speed i ...

NISSAN Intelligent Key battery discharge
If the battery of the NISSAN Intelligent Key is discharged or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure: 1. Place the shift lever in the P (Park) position. 2. Firmly apply the foot brake. 3. Touch the ignition switc ...