Nissan Altima 2007-2012 Service Manual: Door finisher
Exploded View
1. Power window switch finisher
2. Front door finisher
3. Step lamp
4. Armrest finisher
5. Inside release handle escutcheon
6. Inside release handle
Removal and Installation
Removal
1. Release the pawls at the rear edge and remove inside release handle escutcheon, then remove the screw.
2. Lift power window and door lock/unlock switch finisher upward to remove, then disconnect the connectors.
• Remove the front door finisher screw beneath power window and door lock/unlock switch finisher.
3. Place a suitable tool (A) under the rear corner of the armrest finisher (1) and disengage the bottom plastic clips. Slide the tool up to disengage the three metal clips.
CAUTION: Do not pull on the armrest finisher.
4. Continue to move the suitable tool (A) and disengage the upper metal clip and remove armrest finisher (1).
5. Remove the front door finisher screw beneath armrest finisher.
6. Release the clips around outer edge, then remove front door finisher.
7. Disconnect inside release handle and lock knob cables from back of front door finisher.
Installation
Installation is in the reverse order of removal.
Body side trim
Exploded View
1. Front pillar finisher
2. Front body side welt
3. Front kicking plate
4. Front sill cover
5. Rear lower finisher
6. Upper pillar finisher
7. Rear pillar finisher
Removal ...
Other materials:
Precaution
Supplemental Restraint System (SRS) "AIR B
AG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and fron ...
Headlamp
CONSULT-III Function
WORK SUPPORT
1 : Initial setting
2: With auto light system
DATA MONITOR
1: With auto light system.
2: The item is indicated, not monitored.
ACTIVE TEST
*: The item is indicated, not monitored. ...
Function diagnosis
LUBRICATION SYSTEM
Lubrication Circuit
Schematic
1. Oil pan
2. Oil strainer
3. Oil pump
4. Regulator valve
5. Oil filter
6. Relief valve (Built in oil filter)
7. Oil cooler
8. Bypass
9. Main gallery
10. Main bearing
11. Timing chain and balancer unit timing
chain oil jet
12. Conne ...