Nissan Altima (L32) 2007-2012 Service Manual: Drive belts

11

Checking Drive Belts

1. Power steering pump

2. Drive belt auto-tensioner

3. Crankshaft

4. Idler pulley

5. A/C compressor pulley

6. Generator pulley

7. Idler pulley

8. Drive belt

A. Indicator

B. Possible use range (for new belt)

C. Belt replacement

WARNING: Inspect and check the drive belts with the engine off.

1. Inspect belt for cracks, fraying, wear or oil adhesion. If necessary, replace with a new one.

2. Rotate the crankshaft pulley two times then check the belt tension.

NOTE: • Inspect drive belt tension when engine is cold.

Tension Adjustment

• Belt tension is not manually adjustable, it is automatically adjusted by the drive belt auto-tensioner.

    Engine maintenance (VQ35DE)
    ...

    Engine coolant
    Changing Engine Coolant WARNING: • To avoid being scalded, never change the coolant when the engine is hot. • Wrap a thick cloth around cap and carefully remove the cap. First, turn the cap ...

    Other materials:

    Engine control system symptoms
    Symptom Table SYSTEM — BASIC ENGINE CONTROL SYSTEM 1 - 6: The numbers refer to the order of inspection. (continued on next page) SYSTEM — ENGINE MECHANICAL & OTHER 1 - 6: The numbers refer to the order of inspection. ...

    B26E1 No reception of engine status signal
    Description BCM receives the engine status signal from ECM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B26E1 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to SEC-235, "DTC Logic". • If DTC B26E1 is displayed wi ...

    Precautions on child restraints
    WARNING Failure to follow the warnings and instructions for proper use and installation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: The child restraint must be used and installed properly. Always follow all of ...