Nissan Altima 2007-2012 Service Manual: Driver side

Description

Door glass moves UP/DOWN by receiving the signal from power window main switch.

Component Function Check

1. CHECK POWER WINDOW MOTOR CIRCUIT

Does front power window motor LH operate with operating main power window and door lock/unlock switch? Is the inspection result normal? YES >> Front power window motor LH is OK.

NO >> Refer to PWC-313, "DRIVER SIDE : Diagnosis Procedure".

Diagnosis Procedure

Front Power Window Motor LH Circuit Check

1. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL

1. Disconnect front power window motor LH.

2. Turn ignition switch ON.

3. Check voltage between front power window motor LH connector and ground.

Is the measurement value within the specification? YES >> GO TO 2

NO >> Replace main power window and door lock/unlock switch. Refer to PWC-411, "Removal and Installation". After that, refer to PWC-314, "DRIVER SIDE : Special Repair Requirement".

2. CHECK HARNESS CONTINUITY

1. Turn ignition switch OFF.

2. Disconnect main power window and door lock/unlock switch and front power window motor LH.

3. Check continuity between main power window and door lock/ unlock switch connector (A) and front power window motor connector LH (B).

4. Check continuity between main power window and door lock/unlock switch connector (A) and ground.

Is the inspection result normal? YES >> GO TO 3

NO >> Repair or replace harness.

3. CHECK POWER WINDOW MOTOR

Check front power window motor LH.

Refer to PWC-314, "DRIVER SIDE : Component Inspection".

Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

NO >> Replace power window motor LH. Refer to GW-19, "Removal and Installation". After that, refer to PWC-314, "DRIVER SIDE : Special Repair Requirement".

Component Inspection

1. CHECK FRONT POWER WINDOW MOTOR LH

Does motor operate by connecting the battery voltage directly to power window motor?

Is the inspection result normal? YES >> Front power window motor LH is OK.

NO >> Replace front power window motor LH. Refer to GW-19, "Removal and Installation". After that, refer to PWC-314, "DRIVER SIDE : Special Repair Requirement".

Special Repair Requirement

1. PERFORM INITIALIZATION PROCEDURE

Perform initialization procedure.

Refer to PWC-295, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement".

Is the inspection result normal? YES >> GO TO 2

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

2. CHECK ANTI-PINCH OPERATION

Check anti-pinch operation.

Refer to PWC-295, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement".

Is the inspection result normal? YES >> Inspection End.

NO >> Refer to PWC-320, "DRIVER SIDE : Component Function Check".

    Passenger side
    Description Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or power window and door lock/unlock switch RH. Component Function Check 1. CHECK ...

    Other materials:

    P1550 battery current sensor
    Description The power generation voltage variable control enables fuel consumption to be decreased by reducing the engine load which is caused by the power generation of the generator. The battery current sensor is installed to the battery cable at the negative terminal. The sensor measures ...

    Bluetooth® streaming audio without Navigation System (Type B) (if so equipped)
    If you have a compatible Bluetooth® audio device that is capable of playing audio files, the device can be connected to the vehicle’s audio system so that the audio files on the device play through the vehicle’s speakers. Connecting Bluetooth® audio To connect your Bluetooth® audio de ...

    Memory function does not operate
    Diagnosis Procedure SYMPTOM: Memory function does not operate. The setting is not maintained (it returns to the initial condition). Inspection procedure 1.CHECK OPERATION 1. Set temperature control dial to 32°C (90°F). 2. Press OFF switch. 3. Press ignition switch OFF. 4. Press ig ...