Nissan Altima manuals

Nissan Altima (L33) 2013-2018 Owners Manual: During a call

While a call is active, press the access additional options. Speak one of the following button to
access additional options. Speak one of the following commands:

● “Send” – Speak this command followed by the digits to enter digits during the phone call.

● “Mute On” or “Mute Off” – Speak the command to mute or unmute the system.

● “Transfer Call” – Speak this command to transfer the call to the handset. To transfer the call back from the handset to the Bluetooth® Hands-Free Phone System, press the when  button and confirm
when prompted.

If supported by the phone, the Bluetooth® Hands-Free Phone System allows for call waiting functionality. If a call is received while another call is already active, a message will be displayed on the screen. Press the hold the button to
hold the active call and switch to the second call. Press the call.button to reject the second
call.

While the second call is active, pressing the commands button will allow the same
commands that available during any call as well as two additional commands:

● “Switch Call” – Speak this command to hold the second call and switch back to the original call.

● “End Other Call” – Speak this command to stay with the second call and end the original call.

Press the call. Press button to accept the
call. Press the Ending a callbutton to reject the call.


Receiving a call
When a call is received by the phone connected to the vehicle’s Bluetooth® Hands-Free Phone System, the call information is displayed on either the vehicle information display or both the vehicl ...

Ending a call
To end an active call, press the button. ...

Other materials:

P0607 ECM
Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each c ...

Passenger side
Description Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or power window and door lock/unlock switch RH. Component Function Check 1. CHECK FRONT POWER WINDOW MOTOR RH CIRCIUT Does front power window motor RH operate with main power windo ...

Vin registration
Description VIN Registration is an operation to registering VIN in ECM. It must be performed each time ECM is replaced. NOTE: Accurate VIN which is registered in ECM may be required for Inspection & Maintenance (I/M) Special Repair Requirement 1.CHECK VIN Check the VIN of the vehicl ...