Nissan Altima 2007-2012 Service Manual: ECU diagnosis

Push-button ignition switch position indicator
Description The switch that changes the power supply position. BCM maintains the power supply position status. BCM changes the power supply position with the operation of the push-button ign ...

BCM (Body control module)
Reference Value VALUES ON THE DIAGNOSIS TOOL Terminal Layout Physical Values 1: Sedan only 2: With LH front window anti-pinch 3: With LH and RH ...

Other materials:

On board refueling vapor recovery (ORVR)
Description From the beginning of refueling, the air and vapor inside the fuel tank go through refueling EVAP vapor cut valve and EVAP/ORVR line to the EVAP canister. The vapor is absorbed by the EVAP canister and the air is released to the atmosphere. When the refueling has reached the ...

P0456 Evap control system
DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0456 is displayed with DTC P0442, first perform the trouble diagnosis for DTC P0456. This diagnosis detects very small leakage in the EVAP line between fuel tank and EVAP canister purge volume control solenoid valve, using the negative pressure. ...

P0740 torque converter clutch solenoid valve
Description • The torque converter clutch solenoid valve is activated by the TCM in response to signals sent from the vehicle speed and accelerator pedal position sensors. Lock-up piston operation will then be controlled. • Lock-up operation, however, is prohibited when CVT fluid temper ...