Nissan Altima 2007-2012 Service Manual: Engine maintenance (VQ35DE)

Evap vapor lines
Inspection 1. Visually inspect EVAP vapor lines for improper attachment and for cracks, damage, loose connections, chafing and deterioration. 2. Inspect fuel tank filler cap vacuum relief valv ...

Drive belts
Checking Drive Belts 1. Power steering pump 2. Drive belt auto-tensioner 3. Crankshaft 4. Idler pulley 5. A/C compressor pulley 6. Generator pulley 7. Idler pulley 8. Drive belt A. Indicat ...

Other materials:

P2135 TP sensor
Description Electric throttle control actuator consists of throttle control motor, throttle position sensor, etc. The throttle position sensor responds to the throttle valve movement. The throttle position sensor has two sensors. These sensors are a kind of potentiometers which transform the ...

P0448 Evap canister vent control valve
Description The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. This solenoid valve responds to signals from the ECM. When the ECM sends an ON signal, the coil in the solenoid valve is energized. A plunger will then move to seal the ca ...

B2556 push-button ignition switch
Description The switch that changes the power supply position. BCM maintains the power supply position status. BCM changes the power supply position with the operation of the push-button ignition switch. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATIO ...