Nissan Altima 2007-2012 Service Manual: Exterior lighting system

Disassembly and assembly
DOOR MIRROR Exploded View 1. Door mirror cover 2. Mirror housing assembly 3. Mirror glass and holder Disassembly 1. Turn the mirror glass surface upward. 2. Apply a protective tape (A) to ...

Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1.INTERVIEW FOR MALFUNCTION Find out what the customer's concerns are. >> GO TO 2 2.SYMPTOM CHECK Verify the s ...

Other materials:

In-vehicle sensor
Removal and Installation REMOVAL 1. Remove the instrument lower cover LH. Refer to IP-12, "Removal and Installation". 2. Remove the in-vehicle sensor screw and remove the in-vehicle sensor. INSTALLATION Installation is in the reverse order of removal. • Make sure that the ...

Fuel pressure
Inspection FUEL PRESSURE RELEASE 1. Turn ignition switch ON. 2. Perform “FUEL PRESSURE RELEASE” in “WORK SUPPORT” mode with CONSULT-III. 3. Start engine. 4. After engine stalls, crank it two or three times to release all fuel pressure. 5. Turn ignition switch OFF. 1. Rem ...

BCM branch line circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the BCM for damage, bend and loose connection (unit side and connector side). Is the inspec ...