Nissan Altima 2007-2012 Service Manual: Fender protector
Removal and Installation
1. Fender protector
2. Fender protector side cover
A. J-clips
B. Clips
C. Center mudguard screw
a. Sheet metal nut
REMOVAL
1. Remove the engine under cover. Refer to EXT-13, "Removal and Installation".
2. Remove the screw from center mudguard.
3. Remove the fender protector screws and clips.
4. Remove the fender protector.
INSTALLATION
Installation is in the reverse order of removal.
Cowl top
Removal and Installation 1. Cowl top seal 2. Cowl top side trim covers 3. Cowl top foam blocks 4. Cowl top A. Clips REMOVAL 1. Remove both the RH and LH wiper arms. Refer to WW-116, "FRO ...Mudguard
Removal and Installation 1. Center mudguard A. C205 push pin B. Splash guard screw REMOVAL 1. Remove the C205 push-pins located on the under body. 2. Remove splash guard screws. 3. Remov ...Other materials:
Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
1. GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the
condition and the environment when
the incident/malfunction occurred).
>> GO TO 2
2. CHECK DTC
1. Check DT ...
Oil pump
Removal and Installation
REMOVAL
1. Remove the timing chain. Refer to EM-163, "Removal".
2. Remove oil pump assembly.
INSTALLATION
Installation is in the reverse order of removal.
Disassembly and Assembly
1. Oil pump housing
2. Outer rotor
3. Inner rotor
4. Oil pump cover
5. ...
Automatic speed control device
(ASCD)
System Diagram
System Description
INPUT/OUTPUT SIGNAL CHART
*: This signal is sent to the ECM via the CAN communication line
BASIC ASCD SYSTEM
Refer to Owner's Manual for ASCD operating instructions.
Automatic Speed Control Device (ASCD) allows a driver to keep vehicle at
predetermine ...