Nissan Altima Owners Manual: FM/AM radio with compact disc (CD) player (Type B) (if so equipped)

1.  CD eject button


1. 2. CD button CD eject button
2. CD button
3. Display screen
4. CD insert slot
5. 6. SCAN button SEEK button
6. SCAN button
7. 8.  BACK button TRACK button
8. 9. APPS button BACK button
9. APPS button
10.TUNE/FOLDER knob, ENTER/SETTING button
11.Station select (1 - 6) buttons 12.RDM button
13.RPT button
14.VOL (volume) knob / 15.DISP button button
15.DISP button
16.MEDIA button
17.FM•AM button

*APPS button is a button to launch the Smartphone Integration mode. See “NissanConnect APP Smartphone Integration (if so equipped)” in this section.

For all operation precautions, see “Audio operation precautions” in this section.

Audio main operation

VOL (volume) /

button: (power)
button:

Place the ignition switch in the ACC or ON position and press the button (power)
button while the system is off to call up the mode (radio, CD, AUX, Bluetooth® audio USB or iPod®) that was playing immediately before the system was turned off.

To turn the system off, press the (power)
(power) button.

Turn the VOL (volume) control knob to adjust the volume.

This vehicle may be equipped with Speed Sensitive Volume. When this feature is active, the audio volume changes as the driving speed changes.

SETTING button:

Press the SETTING button to show the Settings screen on the display. Turn the TUNE/FOLDER knob to navigate the options and then press the ENTER button to make a selection.

Bass, treble, balance and fade can also be adjusted by pressing the AUDIO


Bass, treble, balance and fade can also be adjusted by pressing the AUDIO control knob and turning it to select the item to adjust. When the desired item is shown on the display, turn the tuning to adjust and then press the AUDIO button until the display returns to the main audio screen. If the button is not pressed for approximately 10 seconds, the radio or CD display will automatically reappear.

APPS button

Press the APPS button to launch the Smartphone Integration Mode. See “NissanConnect APP Smartphone Integration (if so equipped)” in this section for more information about using this feature.

To connect your phone see the “Bluetooth® Hands-Free Phone system without Navigation (Type B) (if so equipped).

FM/AM radio operation

FM·AM button:

Press the FM·AM button to change the band as follows:

AM → FM1 → FM2 → AM

If another audio source is playing when the FM·AM button is pressed, the audio source playing will automatically be turned off and the last radio station played will begin playing.

The FM stereo indicator (STEREO) is shown on the screen during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception.

TUNE/FOLDER knob (Tuning):

Turn the TUNE/FOLDER knob to the left or right for manual tuning.

SEEK tuning:


SEEK tuning:

Press the SEEK button to tune or
from low to high or high to low frequencies and to to tune
from low to high or high to low frequencies and to stop at the next broadcasting station.

SCAN tuning:

Press the SCAN button to stop at each broadcasting station for 5 seconds. SCAN will appear on the screen while the radio is scan tuning.

Pressing the button again during this 5 second period will stop SCAN tuning and the radio will remain tuned to that station. If the SCAN button is not pressed within 5 seconds, SCAN tuning moves to the next station.

1 to 6 Station memory operations:

Six stations can be set for the AM band. Twelve stations can be set for the FM band (6 for FM1, 6 for FM2).

1. Choose the radio band AM, FM1 or FM2 using the FM·AM select button.

2. Tune to the desired station using the SEEK button or the TRACK
button. Press and hold any of the desired
button. Press and hold any of the desired station memory buttons (1 – 6) until the preset number is updated on the display and the sound is briefly muted.

3. The channel indicator will then come on and the sound will resume. Programming is now complete.

4. Other buttons can be set in the same manner.

If the battery cable is disconnected, or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations.

Compact disc (CD) player operation If the radio is already operating, it automatically turns off and the compact disc begins to play.

MEDIA button:

With a CD loaded, press the MEDIA button until the CD mode is displayed on the screen.

CD/MP3 display mode:

While listening to an MP3/WMA CD, certain text may be displayed on the screen if the CD has been encoded with text information. Depending on how the MP3/WMA CD is encoded, information such as Artist, Song and Folder will be displayed.

The track number and the total number of tracks in the current folder or on the current disc are displayed on the screen as well.

SEEK/TRACK (Reverse or


SEEK/TRACK (Reverse or Fast Forward) button:

Press and hold the SEEK/TRACK button or  for 1.5 seconds while the
or compact disc for 1.5 seconds while the
compact disc is playing to reverse or fast forward the track being played. The compact disc plays at an increased speed while reversing or fast forwarding.

When the button is released, the compact disc returns to normal play speed.

SEEK/TRACK button:


SEEK/TRACK button:

Press the SEEK/TRACK button while a
while a CD or MP3/WMA CD is playing to return to the beginning of the current track. Press the SEEK/TRACK button skip several times to
skip backward several tracks.

Press the SEEK/TRACK button CD or MP3/WMA CD is playing to advance onewhile a
CD or MP3/WMA CD is playing to advance one track. Press the SEEK/TRACK button several
several times to skip forward several tracks. If the last track on a CD is skipped, the first track on the disc is played. If the last track in a folder of an MP3/WMA CD is skipped, the first track of the next folder is played.

TUNE/FOLDER knob (MP3/WMA CD only):

If an MP3/WMA CD with multiple folders is playing, turn the TUNE/FOLDER knob to change folders.

Turn the knob to the left to skip back a folder. Turn the knob to the right to skip ahead a folder.

RPT button:

When the RPT button is pressed while a compact disc is playing, the play pattern can be changed as follows:

CD:

1 Track Repeat ←→ OFF

CD with MP3 or WMA:

1 Folder Repeat → 1 Track Repeat → OFF

1 Track Repeat: the current track will be repeated.

1 Folder Repeat: the current folder will be repeated.

OFF: No repeat play pattern is applied. The indicator on the display will turn off.

The current play pattern of the CD is displayed on the screen unless no pattern is applied.

RDM button:

When the RDM button is pressed while a compact disc is playing, the play pattern can be changed as follows:

CD:

1 Disc Random ←→ OFF

CD with MP3 or WMA:

1 Disc Random → 1 Folder Random → OFF

1 Disc Random: all tracks on the disc will be played randomly.

1 Folder Random: all tracks in the current folder will be played randomly.

OFF: No random play pattern is applied. The indicator on the display will turn off.

The current play pattern of the CD is displayed on the screen unless no pattern is applied.

EJECT button:


EJECT button:

When the a compact button is pressed with
a compact disc loaded, the compact disc will eject and the last source will be played.

When the with a button is pressed twice
with a compact disc loaded, the compact disc will be ejected further for easier CD removal. If the disc is not removed within 20 seconds, the disc will reload.

    FM/AM radio with compact disc (CD) player (Type A) (if so equipped)
    1. CD eject button 2. CD button 3. Display screen 4. CD insert slot 5. SEEK button 6. SCAN button 7. TRACK button 8. BACK button 9. iPod MENU button 10.TUNE/FOLDER knob, ENTER/SETTING bu ...

    FM/AM/SAT radio with compact disc (CD) player (Type C) (if so equipped)
    1. CD eject button 2. XM button* 3. Display screen 4. CD insert slot 5. SEEK button 6. SCAN button 7. CAT button 8. BACK button 9. APPS button 10.TUNE/SCROLL knob, ENTER/SETTING button ...

    Other materials:

    P0171 fuel injection system function
    DTC Logic DTC DETECTION LOGIC With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the A/F sensors 1. The ECM calculates the necessary compensation to correct t ...

    Front wiper motor ground circuit
    Diagnosis Procedure 1.CHECK FRONT WIPER MOTOR (GND) OPEN CIRCUIT 1. Turn the ignition switch OFF. 2. Disconnect front wiper motor. 3. Check continuity between front wiper motor harness connector and ground. Does continuity exist? YES >> Front wiper motor ground circuit is norma ...

    Park/neutral position (PNP) switch
    Exploded View 1. Washer 2. Manual lever 3. PNP switch 4. CVT assembly Removal and Installation Refer to the figure for removal and installation. NOTE: • Align PNP switch position when installing. • After installation of PNP switch, check the continuity of PNP switch. • Afte ...