Nissan Altima 2007-2012 Service Manual: Front power window switch

Description

• BCM supplies power.

• Front power window motor RH will be operated if power window and door lock/unlock switch RH is operated.

Component Function Check

Power Window And Door Lock/unlock Switch RH

1. CHECK POWER WINDOW MOTOR FUNCTION

Does front power window motor operate with power window and door lock/unlock switch RH operation? Is the inspection result normal? YES >> Power window and door lock/unlock switch RH power supply and ground circuit are OK.

NO >> Refer to PWC-108, "FRONT POWER WINDOW SWITCH : Diagnosis Procedure".

Diagnosis Procedure

Power Window And Door Lock/Unlock Switch RH Power Supply Circuit Check

1. CHECK POWER SUPPLY CIRCUIT

1. Turn ignition switch ON.

2. Check voltage between power window and door lock/unlock switch RH connector and ground.

Is the measurement value within the specification? YES >> GO TO 3

NO >> GO TO 2

2. CHECK HARNESS CONTINUITY

1. Turn ignition switch OFF.

2. Disconnect BCM and power window and door lock/unlock switch RH.

3. Check continuity between BCM connector (A) and power window and door lock/unlock switch RH connector (B).

4. Check continuity between BCM connector (A) and ground.

Is the inspection result normal? YES >> GO TO 4

NO >> Repair or replace harness.

3. CHECK HARNESS CONTINUITY (POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH)

1. Turn ignition switch OFF.

2. Disconnect main power window and door lock/unlock switch and power window and door lock/unlock switch RH.

3. Check continuity between main power window and door lock/ unlock switch connector (A) and power window and door lock/ unlock switch RH connector (B).

4. Check continuity between main power window and door lock/unlock switch connector (A) and ground.

Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

NO >> Repair or replace harness.

4. CHECK HARNESS CONTINUITY

1. Connect BCM.

2. Turn ignition switch ON.

3. Check voltage between power window and door lock/unlock switch RH connector and ground.

Is the inspection result normal? YES >> GO TO 5

NO >> Repair or replace harness.

5. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

Check power window and door lock/unlock switch RH.

Refer to PWC-110, "FRONT POWER WINDOW SWITCH : Component Inspection".

Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

NO >> Replace power window and door lock/unlock switch RH. Refer to PWC-186, "Removal and Installation".

Component Inspection

COMPONENT INSPECTION

1. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

Check power window and door lock/unlock switch RH.

Is the inspection result normal? YES >> Power window and door lock/unlock switch RH is OK.

NO >> Replace power window and door lock/unlock switch RH. Refer to PWC-186, "Removal and Installation".

    Power window main switch
    Description • BCM supplies power. • It operates each power window motor via corresponding power window switch and makes window move up/ down when main power window and door lock/unlock swi ...

    Rear power window switch
    Description • BCM supplies power. • Rear power window motor will be operated if rear power window switch is operated. Rear power window switch.  Component Function Check Rear Power ...

    Other materials:

    Passenger side
    Description • BCM supplies power. • Power window motor RH will be operated if power window and door lock/unlock switch RH is operated. Component Function Check Power Window And Door Lock/unlock Switch RH 1. CHECK POWER WINDOW MOTOR RH FUNCTION Does power window motor RH operate with p ...

    Basic inspection
    DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1. GET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred). >> GO TO 2 2. CHECK DTC 1. Check DTC ...

    Power supply and ground circuit
    Description • EPS system functions by ignition power supply. Diagnosis Procedure 1.CHECK POWER SUPPLY 1. Turn the ignition switch OFF. 2. Disconnect power steering control unit harness connector. 3. Check voltage between power steering control unit harness connector M59 terminal 3 and ...