Nissan Altima 2007-2012 Service Manual: Front tweeter (coupe)

Description

The audio unit sends audio signals to the front tweeters using the door speaker circuits.

Diagnosis Procedure

1.HARNESS CHECK

1. Disconnect audio unit connector M43 (A) and suspect tweeter connector (B).

2. Check continuity between audio unit harness connector M43 (A) and suspect tweeter harness connector (B).

3. Check continuity between audio unit harness connector M43 (A) and ground.

Are the continuity results as specified? YES >> GO TO 2

NO >> • Check connector housings for disconnected or loose terminals.

• Repair harness or connector.

2.FRONT TWEETER SIGNAL CHECK

1. Connect audio unit connector and tweeter connector.

2. Turn ignition switch to ACC.

3. Push “POWER” switch.

4. Check the signal between audio unit harness connector terminals with CONSULT-III or oscilloscope.

Is the audio signal voltage as specified? YES >> Replace tweeter. Refer to AV-73, "Removal and Installation".

NO >> Replace audio unit. Refer to AV-72, "Removal and Installation".

    Front door speaker (sedan)
    Description The audio unit sends audio signals to the front door speakers using the door speaker circuits. Diagnosis Procedure 1.HARNESS CHECK 1. Disconnect audio unit connector M43 (A) and su ...

    Tweeter (sedan)
    Description The audio unit sends audio signals to the tweeters using the door speaker circuits. Diagnosis Procedure 1.HARNESS CHECK 1. Disconnect audio unit connector M43 (A) and suspect tweete ...

    Other materials:

    IPDM-E branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the IPDM E/R for damage, bend and loose connection (unit side and connector side). Is the in ...

    Insufficient cooling
    Component Function Check SYMPTOM: Insufficient cooling INSPECTION FLOW 1. CONFIRM SYMPTOM BY PERFORMING OPERATION CHECK - TEMPERATURE DECREASE 1. Press the AUTO switch. 2. Turn temperature control dial (LH) counterclockwise until 18°C (32°F) is displayed. 3. Check for cold air at disch ...

    Voice Adaptation (VA) mode
    Voice Adaptation allows up to two out-of-dialect users to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different voice adaptation model ...