Nissan Altima 2007-2012 Service Manual: Fuel gauge
System Diagram
System Description
The fuel gauge indicates the approximate fuel level in the fuel tank.
The fuel gauge is regulated by the unified meter control unit and a variable resistor signal supplied by the fuel level sensor unit.
Component Parts Location
1. Combination meter M24
2. IPDM E/R E17, E18, E201, F10
3. ECM E10
4. TCM F16
5. BCM M17, M18, M19, M21 (view with instrument panel removed)
6. ABS actuator and electric unit (control unit) E26
7. Fuel level sensor unit and fuel pump (fuel level sensor) B42 (view with rear seat and inspection hole cover removed)
8. Ambient sensor E211 (view of front bumper fascia)
9. Oil pressure switch F41 (QR25DE) (view with engine removed)
10. Oil pressure switch F41 (VQ35DE) (view with engine removed)
11. Parking brake switch M73 (Sedan with M/T and Coupe) (view with center console removed)
12. Parking brake switch E35 (Sedan with CVT) (view with instrument lower cover LH removed)
Component Description
Engine coolant temperature gauge
System Diagram System Description The engine coolant temperature gauge indicates the engine coolant temperature. The ECM provides an engine coolant temperature signal to the combination mete ...ODO/TRIP meter
System Diagram System Description The vehicle speed signal and the memory signals from the meter memory circuit are processed by the combination meter and the mileage is displayed. HOW TO CHA ...Other materials:
B1081 – B1084 seat belt pre-tensioner
RH
Description
DTC B1081 – B1084 SEAT BELT PRE-TENSIONER RH
The seat belt pre-tensioner RH is wired to the air bag diagnosis sensor unit.
The air bag diagnosis sensor unit
will monitor for opens and shorts in detected lines to the seat belt pre-tensioner
RH.
PART LOCATION
Refer to SRC-7, &qu ...
Clutch pedal
Exploded View
1. Clutch pedal assembly
2. Clutch interlock switch
3. ASCD clutch switch
4. Lock nut
Removal and Installation
REMOVAL
1. Disconnect master cylinder rod end from clutch pedal lever.
2. Disconnect the ASCD clutch switch and clutch interlock switch
harness connectors.
3. ...
Inspection and adjustment
Description and Conditions
DESCRIPTION
The purpose of the operational check is to confirm that the system operates
properly.
CONDITIONS:
• Engine running and at normal operation temperature.
Operational Check
STEP 1: Check Blower
1. Turn blower control dial clockwise, blower should opera ...