Nissan Altima (L32) 2007-2012 Service Manual: Function diagnosis
Inspection and adjustment
Preliminary Check 1.TIRE PRESSURE Check all tire pressures. Refer to WT-70, "Tire". Do tire pressures match specification? YES >> GO TO 2 NO >> Adjust tire pressure to spe ...TPMS
System Diagram System Description BODY CONTROL MODULE (BCM) The BCM is shown with the instrument panel LH removed. The BCM reads the air pressure signal received by the tire pressure receiver, ...Other materials:
How to park with predicted course lines
WARNING
● Always turn and check that it is safe to
do so before backing up. Always back
up slowly.
● Use the displayed lines as a reference.
The lines are highly affected by the number
of occupants, fuel level, vehicle position,
road conditions and road grade.
● If the ti ...
IPDM-E branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the IPDM E/R for damage, bend and loose
connection (unit side
and connector side).
Is the in ...
Door outside molding
Removal and Installation
1. Front door outside molding
2. Front door
Door Outside Molding
Removal
1. Open the front door window fully.
2. Remove the side view mirror. Refer to MIR-19, "Removal and Installation".
3. Lift and twist front door molding from rear end, disconnect ...