Nissan Altima (L32) 2007-2012 Service Manual: Function diagnosis
Additional service when replacing
control unit
Description
Initial setting is necessary when replacing main power window and door
lock/unlock switch.
CAUTION:
The following specified operations are not performed under the non-initial ...
Power window system
System Diagram
POWER WINDOW ANTI-PINCH SYSTEM
System Description
POWER WINDOW MAIN SWITCH
INPUT/OUTPUT SIGNAL CHART
POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
INPUT/OUTPUT SIGNAL CHART
POWE ...
Other materials:
Can communication circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CONNECTOR INSPECTION
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Disconnect all the unit connectors on CAN communication system.
4. Check terminals and connectors for damage, bend and loose con ...
Seat belt, buckles, retractors, anchors
and adjusters
Inspection
CAUTION:
• After any collision, inspect all seat belt assemblies, including retractors
and other attached hardwares
(I.e. anchor bolt, guide rail set). Nissan recommends to replace all seat belt
assemblies in use
during a collision, unless not damaged and properly operating afte ...
How to switch the display
A : Original screen before the RearView Monitor
is operated
B : Rear-wide view screen
C : Rear view screen
1 : Shift lever is moved into the R (Reverse)
position
2 : Shift lever is moved out of the R (Reverse)
position
3 : Select the “View” key on the screen
● When the shift lev ...
