Nissan Altima 2007-2012 Service Manual: Function diagnosis
Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
1. GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the
condition and the e ...
Power distribution system
System Description
INPUT/OUTPUT SIGNAL CHART
SYSTEM DESCRIPTION
• PDS (POWER DISTRIBUTION SYSTEM) is the system that BCM controls with the
operation of the pushbutton
ignition switch and per ...
Other materials:
P0144 HO2S3
Description
The heated oxygen sensor 3, after HC adsorption catalyst (Under
floor), monitors the oxygen level in the exhaust gas on each bank.
This sensor is made of ceramic zirconia. The zirconia generates voltage
from approximately 1V in richer conditions to 0V in leaner conditions.
Unde ...
P0112, P0113 IAT sensor
Description
The intake air temperature sensor is built-into the mass air flow sensor
(1). The sensor detects intake air temperature and transmits a
signal to the ECM.
The temperature sensing unit uses a thermistor which is sensitive to
the change in temperature. Electrical resistance of the ...
Door finisher
Exploded View
1. Power window switch finisher
2. Front door finisher
3. Step lamp
4. Armrest finisher
5. Inside release handle escutcheon
6. Inside release handle
Removal and Installation
Removal
1. Release the pawls at the rear edge and remove inside release handle
escutcheon, then ...