Nissan Altima (L32) 2007-2012 Service Manual: Function diagnosis
Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Work Flow DETAILED FLOW 1.OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain as much information as possible about the conditions and environment un ...Other materials:
B260A ignition relay
Description
BCM turns ON the following relays to ignition power supply to each ECU when
the ignition switch is turned
ON.
• Ignition relay-1 (inside IPDM E/R)
• Ignition relay-2 (inside fuse box)
• Blower fan motor relay
BCM checks any ignition relay ON request for consistency with ...
Changing a flat tire
If you have a flat tire, follow the instructions below:
Stopping the vehicle
1. Safely move the vehicle off the road and
away from traffic.
2. Turn on the hazard warning flashers.
3. Park on a level surface and apply the parking
brake. Move the shift lever to P (Park).
4. Turn off the engine. ...
Rear spoiler
Removal and Installation
1. Rear spoiler assembly
2. High mounted stop lamp harness
3. Gasket
A. Nuts
Removal
1. Remove trunk lid finisher (if equipped). Refer to INT-23, "Removal and
Installation".
2. Disconnect high mounted stop lamp connector.
3. Using a trim stick, ca ...