Nissan Altima 2007-2012 Service Manual: Function diagnosis
- CVT system
- Mechanical system
- Hydraulic control system
- Control system
- Lock-up and select control system
- Shift mechanism
- Shift lock system
- On board diagnostic (OBD) system
- Diagnosis system (TCM)
Inspection and adjustment
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT
Precaution for TCM and CVT
Assembly Replacement
CAUTION:
• Check if new data (Unit ID) are entered correctly after replacing CVT assembly
and er ...
CVT system
System Diagram
Component Parts Location - Coupe
1. Control device assembly (Manual
mode select switch and manual
mode position select switch)
2. Accelerator pedal position (APP)
sensor
3. S ...
Other materials:
Rear view camera control unit
Diagnosis Procedure
1.CHECK FUSE
Check that the following fuses of the rear view camera control unit are not
blown.
Are the fuses OK?
YES >> GO TO 2
NO >> Be sure to eliminate cause of malfunction before installing new fuse.
2.CHECK POWER SUPPLY CIRCUIT
Check voltage between r ...
Inside mirror
Exploded View
1. Inside mirror
2. Inside mirror finisher (if equipped)
3. Mirror base
Removal and Installation
1. Remove inside mirror finisher (if equipped).
2. Remove screw of mirror base.
3. Slide the mirror upward to remove.
4. Disconnect the connector (if equipped).
INSTALL ...
Battery
How to Handle Battery
CAUTION:
• If it becomes necessary to start the engine with a booster battery and jumper
cables, use a 12-volt
booster battery.
• After connecting battery cables, ensure that they are tightly clamped to
battery terminals for good
contact.
• Never add distill ...
