Nissan Altima 2007-2012 Service Manual: Ground

Ground Distribution

MAIN HARNESS

ENGINE ROOM HARNESS

FRONT END MODULE HARNESS

ENGINE CONTROL HARNESS

BODY HARNESS

BODY NO. 2 HARNESS

HARNESS

Harness Layout

HOW TO READ HARNESS LAYOUT

The following Harness Layouts use a map style grid to help locate connectors on the drawings: • Main Harness, Console Sub-harness and Console Switch Subharness

• Engine Room Harness

• Engine Room Harness (Passenger Compartment)

• Front End Module Harness

• Engine Control Harness (VQ35DE) and Knock Sensor Sub-harness

• Engine Control Harness (VQ35DE) and Knock Sensor Sub-harness

• Engine Control Harness (VQ35DE) and Knock Sensor Sub-harness

• Body No. 2 Harness

• Room Lamp Harness

To use the grid reference

1. Find the desired connector number on the connector list.

2. Find the grid reference.

3. On the drawing, find the crossing of the grid reference letter column and number row.

4. Find the connector number in the crossing zone.

5. Follow the line (if used) to the connector.

OUTLINE

MAIN HARNESS

ENGINE ROOM HARNESS

ENGINE ROOM HARNESS (PASSENGER COMPARTMENT)

FRONT END MODULE HARNESS

ENGINE CONTROL HARNESS (VQ35DE)

ENGINE CONTROL HARNESS (QR25DE)

BODY HARNESS

BODY NO. 2 HARNESS

ROOM LAMP HARNESS

DOOR LH HARNESS

DOOR RH HARNESS

    Power supply routing circuit
    Wiring Diagram — Battery Power Supply — Wiring Diagram — Accessory Power Supply — Wiring Diagram — Ignition Power Supply — Fuse • If fuse is ...

    Electrical units location
    ENGINE COMPARTMENT PASSENGER COMPARTMENT LUGGAGE COMPARTMENT ...

    Other materials:

    B1134 – B1137 side airbag module LH
    Description DTC B1134 – B1137 FRONT LH SIDE AIR BAG MODULE The front LH side air bag module is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the front LH side air bag module. PART LOCATION Refer to SRC- ...

    Pre-inspection for diagnostic
    Basic Inspection The engine start function, door lock function, power distribution system and NATS-IVIS/NMS in the Intelligent Key system are closely related to each other regarding control. Narrow down the functional area in question by performing basic inspection to identify which function ...

    P0443 evap canister purge volume control solenoid valve
    Description The EVAP canister purge volume control solenoid valve uses a ON/ OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount o ...