Nissan Altima (L32) 2007-2012 Service Manual: Headlamp
Description
Headlamp lighting when theft warning system is in alarm phase.
Component Function Check
1.CHECK HEADLAMP OPERATION
Check if headlamps operate by lighting switch.
Does headlamp come on when turning switch “ON”?
YES >> Headlamp circuit is OK.
NO >> Check headlamp system. Refer to SEC-321, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK HEADLAMP OPERATION
Refer to EXL-71, "Wiring Diagram - Sedan" (xenon type) or EXL-61, "Wiring
Diagram - Sedan" (halogen type).
Is the inspection result normal?
YES >> GO TO 2
NO >> Repair or replace malfunctioning parts.
2.CHECK INTERMITTENT INCIDENT
Refer to GI-42, "Intermittent Incident".
>> Inspection End.
Description
Horn (high/low) is located inside of front bumper and operates when theft
warning system is in alarm phase.
Component Function Check
1.CHECK FUNCTION
1. Select HORN in “ACTIVE TES ...
Description
• Warning lamp is built in combination meter.
• Intelligent Key system malfunction is reported to the driver by the warning
lamp illumination.
Component Function Check
1.CHECK ...
Other materials: Control panel buttons
Display screen
TUNE-SCROLL knob / PUSH SOUND
button
BACK button
DISP button
button*
MENU button
(brightness control)
button
VOL (volume) knob / PUSH
(power)
button
* For additional information regarding the
Bluetooth Hands-Free Phone System
control button, see "Bluetooth Hands-
...
Vehicle information display warnings
and indicators
The following messages may appear in
your vehicle information display.
Engine start operation for
Intelligent Key system (if
I-Key battery level is low)
This indicator appears when the battery of
the Intelligent Key is low and when the Intelligent
Key system and the vehicle are not
communicating no ...
NISSAN Intelligent Key battery
discharge
If the battery of the NISSAN Intelligent Key
is discharged or environmental conditions
interfere with the Intelligent Key operation,
start the engine according to the following
procedure:
1. Place the shift lever in the P (Park)
position.
2. Firmly apply the foot brake.
3. Touch the ignition switc ...