Nissan Altima 2007-2012 Service Manual: Headlamp

CONSULT-III Function

WORK SUPPORT

1 : Initial setting

2: With auto light system

DATA MONITOR

1: With auto light system.

2: The item is indicated, not monitored.

ACTIVE TEST

    Common ITEM
    Diagnosis Description BCM CONSULT-III FUNCTION CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the following functions for each sy ...

    Flasher
     CONSULT-III Function Work support * : Initial setting Data monitor Active test ...

    Other materials:

    Engine control system symptoms
    Symptom Table SYSTEM — BASIC ENGINE CONTROL SYSTEM 1 - 6: The numbers refer to the order of inspection. (continued on next page) SYSTEM — ENGINE MECHANICAL & OTHER 1 - 6: The numbers refer to the order of inspection. ...

    Power supply and ground circuit
    Diagnosis Procedure 1.INSPECTION START Start engine. Is engine running? YES >> GO TO 8. NO >> GO TO 2. 2.CHECK ECM POWER SUPPLY CIRCUIT-I 1. Turn ignition switch OFF and then ON. 2. Check the voltage between ECM harness connector and ground. Is the inspection result ...

    Side guard molding
    Removal and Installation 1. Double-faced adhesive tape Removal CAUTION: Never apply tack-paper adhesive remover to body panel surface finished with lacquer-based paints. • Original side guard molding is affixed to body panel with double-faced adhesive tape. 1. Heat molding to betwe ...