Nissan Altima manuals

Nissan Altima (L33) 2013-2018 Owners Manual: Heated seats (if so equipped)

The front seats are warmed by built-in heaters.


The front seats are warmed by built-in heaters.

1. Start the engine.

2. Push the LO or HI position of the switch, as desired. The indicator light in the switch will illuminate.

The heater is controlled by a thermostat, automatically turning the heater on and off.

The indicator light will remain on as long as the switch is on.

3. When the seat is warmed or before you leave the vehicle, be sure to turn the switch off.

WARNING

Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat temperatures or have an inability to feel pain in body parts that contact the seat. Use of the seat heater by such people could result in serious injury.

CAUTION

● The battery could run down if the seat heater is operated while the engine is not running.

● Do not use the seat heater for extended periods or when no one is using the seat.

● Do not put anything on the seat which insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat may become overheated.

● Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in damage to the heater.

● Any liquid spilled on the heated seat should be removed immediately with a dry cloth.

● When cleaning the seat, never use gasoline, benzine, thinner, or any similar materials.

● If any malfunctions are found or the heated seat does not operate, turn the switch off and have the system checked by your NISSAN dealer.

Horn
To sound the horn, push near the horn icon on the steering wheel. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. Tampering ...

Heated steering wheel (if so equipped)
The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below approximately 68°F (20°C). Push the heated steering wheel switch to w ...

Other materials:

Heated steering wheel (if so equipped)
The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below approximately 68°F (20°C). Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light will come on. If the surfac ...

High-pressure flexible hose
Removal and Installation for High-Pressure Flexible Hose QR25DE Removal 1. Discharge the refrigerant. Refer to HA-32, "HFC-134a (R-134a) Service Procedure". 2. Reposition the power steering reservoir out of the way without disconnecting the hose. 3. Reposition the engine coo ...

ABS branch line circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the ABS actuator and electric unit (control unit) for damage, bend and loose connection (unit s ...