Nissan Altima Owners Manual: Heater operation
Heating
This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets and the side vent outlets.
1. Press the button to the OFF
position
for normal heating.
2. Press the air flow control
button.
3. Turn the fan control dial to the desired position.
4. Turn the temperature control dial to the desired position between the middle and the hot position.
Ventilation This mode directs outside air to the side and center vents.
1. Press the button to the OFF
position.
2. Press the air flow control
button.
3. Turn the fan control dial to the desired position.
4. Turn the temperature control dial to the desired position.
Defrosting or defogging
This mode directs the air to the defrost outlets to defrost/defog the windows.
1. Press the defrost/defog button .
2. Turn the fan control dial to the desired position.
3. Turn the temperature control dial to the desired position between the middle and the hot position.
● To quickly remove ice or fog from the windows, turn the fan control dial to the highest setting and the temperature control to the full HOT position.
● When the position is selected,
the air
conditioner automatically turns on (the indicator
light on the button will come on)
if the outside temperature is more than 36°F
(2°C). This dehumidifies the air which helps
defog the windshield. The mode
automatically
turns off, allowing outside air to
be drawn into the passenger compartment
to further improve the defogging performance.
The recirculation mode cannot be
activated in the position.
Bi-level heating
The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets.
1. Press the button to the OFF
position.
2. Press the air flow control
button.
3. Turn the fan control dial to the desired position.
4. Turn the temperature control dial to the desired position.
Heating and defogging
This mode heats the interior and defogs the windshield.
1. Press the air flow control
button.
2. Turn the fan control dial to the desired position.
3. Turn the temperature control dial to the desired position between the middle and the hot position.
● When the position is selected,
the air
conditioner automatically turns on if the outside
temperature is more than 36°F (2°C).
The indicator light on the A/C button will
come on. This dehumidifies the air which
helps defog the windshield. The
mode automatically turns off, allowing outside
air to be drawn into the passenger
compartment to further improve the defogging
performance. The recirculation mode
cannot be activated in the
position.
Operating tips
Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation.
Controls
Fan control dial
The fan control dial turns the fan on and off, and
controls fan speed.
Air flow control buttons
The air flow control buttons allow you to select
the air flow outlets.
MAX
A/C ...
Air conditioner operation
Start the engine, turn the fan control dial to the
desired position, and press the
button to
activate the air conditioner. When the air conditioner
is on, cooling and dehumidifying functions
ar ...
Other materials:
B2191, P1615 Difference of key
Description
Performs ID verification through BCM and keyfob when push-button ignition
switch is pressed.
Prohibits the release of steering lock or start of engine when an unregistered
ID of keyfob is used.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRM ...
P0172 fuel injection system function
DTC Logic
DTC DETECTION LOGIC
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture
ratio can be brought closely to the
theoretical mixture ratio based on the mixture ratio feedback signal from the
A/F sensors 1. The ECM calculates
the necessary compensation to correct t ...
B2556 push-button ignition switch
Description
The switch that changes the power supply position. BCM maintains the power
supply position status. BCM
changes the power supply position with the operation of the push-button ignition
switch.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION ...