Nissan Altima 2007-2012 Service Manual: Idle speed
Description
This describes how to check the idle speed. For the actual procedure, follow the instructions in “BASIC INSPECTION”.
IDLE SPEED : Special Repair Requirement
1.CHECK IDLE SPEED
>> INSPECTION END
Additional service when replacing control unit
Description
When replacing ECM, this procedure must be performed.
Special Repair Requirement
1.PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS IGNITION
KEY IDS
Refer to SEC-15 ...
Ignition timing
Description
This describes how to check the ignition timing. For the actual procedure,
follow the instructions in “BASIC
INSPECTION”.
IGNITION TIMING : Special Repair Requirement
1.CHECK IG ...
Other materials:
Intelligent key system/engine start function symptoms
Symptom Table
Engine cannot be started with all Intelligent Keys.
CAUTION:
• Follow Trouble Diagnosis Flowchart referring to “SEC-209, "Work Flow"”.
Determine malfunctioning
condition before performing this diagnosis.
• Check that vehicle is under the condition shown in ...
B2606 steering lock relay
Description
The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN
communication.
IPDM E/R turns the steering lock relay ON and transmits the release of the
steering to BCM.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2606 is displayed with DTC U1000, first per ...
Tire equipment
1. SUMMER tires have a tread designed to
provide superior performance on dry pavement.
However, the performance of these
tires will be substantially reduced in snowy
and icy conditions. If you operate your vehicle
on snowy or icy roads, NISSAN recommends
the use of MUD & SNOW or ALL
SEA ...
