Nissan Altima 2007-2012 Service Manual: Idle speed
Description
This describes how to check the idle speed. For the actual procedure, follow the instructions in “BASIC INSPECTION”.
Special Repair Requirement
1.CHECK IDLE SPEED
Check idle speed in “DATA MONITOR” mode with CONSULT-III.
Check idle speed with Service $01 of GST.
>> INSPECTION END
Additional service when replacing
control unit
Description
When replacing ECM, this procedure must be performed.
Special Repair Requirement
1.PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS
IGNITION KEY IDS
Ref ...
Ignition timing
Description
This describes how to check the ignition timing. For the actual procedure,
follow the instructions in “BASIC
INSPECTION”.
Special Repair Requirement
1.CHECK IGNITION TIMING
1. A ...
Other materials:
Diagnosis and repair work flow
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
1.GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the
condition and the environment when
the incident/malfunction occurred) using the “Diagnostic Work Sheet”. (Refer to
EC-22, "Diagnostic Work
...
On board refueling vapor recovery
(ORVR)
Description
From the beginning of refueling, the air and vapor inside the fuel tank go
through refueling EVAP vapor cut
valve and EVAP/ORVR line to the EVAP canister. The vapor is absorbed by the EVAP
canister and the air is
released to the atmosphere.
When the refueling has reached the ...
Charging system
Wiring Diagram - Coupe
Wiring Diagram - Sedan
...
