Nissan Altima (L32) 2007-2012 Service Manual: In-cabin microfilter
Removal and Installation
REMOVAL
1. Remove the glove box assembly. Refer to IP-12, "Removal and Installation".
2. Disengage the filter cover tab (1) to remove the filter cover.
3. Remove the in-cabin microfilter from the blower unit by using the
pull tab on the bottom of the filter.
INSTALLATION
Installation is in the reverse order of removal.
Inspection
Check exhaust pipes, muffler and mounting for improper attachment,
leaks, cracks, damage, chafing or deterioration.
• If anything is found, repair or replace damaged parts.
...
Other materials: Warning/Indicator lights (yellow)
For additional information on warnings
and indicators, see "Vehicle information
display-5 inch (13 cm) Type A" or
"Vehicle information display-7 inch (18 cm)
Type B".
or
Anti-lock Braking
System (ABS)
warning light
When the ignition switch is placed in the ON
position, the ABS warning light illumi ...
Instrument panel
Vents
Steering wheel switches for audio control*
Vehicle information display controls
Headlight/turn signal switch
Paddle shifters (if so equipped)
Driver supplemental air bag
Horn
Meters and gauges
Warning and indicator lights
Vehicle information display
Wiper and washer switch
Heat ...
Precautions on SRS
This SRS section contains important information
concerning the following systems:
Driver and front passenger supplemental
front-impact air bag (NISSAN Advanced
Air Bag System)
Front seat-mounted side-impact supplemental
air bag
Rear outboard seat-mounted side-impact
supplemental air bag
Roo ...