Nissan Altima (L32) 2007-2012 Service Manual: Inspection and adjustment
- Additional service when removing battery negative terminal
- Additional service when replacing control unit
Diagnosis and repair workflow
Work Flow OVERALL SEQUENCE DETAILED FLOW 1. GET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the environment when the incident/m ...Additional service when removing battery negative terminal
Description Initial setting is necessary when battery terminal is removed. CAUTION: The following specified operations are not performed under the non-initialized condition. • Auto-up opera ...Other materials:
Front power window switch
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH
Wiring Diagram
Fail Safe
FAIL-SAFE CONTROL
Switches to fail-safe control when malfunction is detected in encoder signal
that detects up/down speed and
direction of door glass. ...
Microphone
Diagnosis Procedure
1.CHECK POWER SUPPLY CIRCUIT (MICROPHONE SIDE)
Check voltage between microphone harness connector and ground.
Is proper voltage present?
YES >> GO TO 4
NO >> GO TO 2
2.CHECK POWER SUPPLY CIRCUIT (CONTINUITY)
1. Turn ignition switch OFF.
2. Disconnect mic ...
P0850 PNP Switch
Description
When the shift lever position is P or N (CVT), Neutral position (M/T),
park/neutral position (PNP) switch is ON.
ECM detects the position because the continuity of the line (the ON signal)
exists.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.INSPECTION START
...