Nissan Altima (L32) 2007-2012 Service Manual: Inspection and adjustment
- Additional service when removing battery negative terminal
- Additional service when replacing control unit
Diagnosis and repair workflow
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
1. GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the
condition and the environment when
the incident/ ...
Additional service when removing battery negative terminal
Description
Initial setting is necessary when battery terminal is removed.
CAUTION:
The following specified operations are not performed under the non-initialized
condition.
• Auto-up operat ...
Other materials:
Warning chime system
System Diagram
System Description
COMBINATION METER
• The buzzer (1) for warning chime system is installed in the combination
meter.
• The buzzer sounds when the combination meter receives a buzzer
output signal from each unit.
BCM
BCM receives signals from various units and transm ...
B2110 PNP/Clutch interlock switch
Description
IPDM E/R confirms the shift position with the following signals.
• Park/neutral position (PNP) switch
• Shift position signal from BCM (CAN)
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2110 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000 ...
P0172, P0175 Fuel injection system function
DTC Logic
DTC DETECTION LOGIC
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture
ratio can be brought closely to the
theoretical mixture ratio based on the mixture ratio feedback signal from A/F
sensor 1. The ECM calculates
the necessary compensation to correct the off ...
