Nissan Altima 2007-2012 Service Manual: Intake door motor

Removal and Installation

REMOVAL

1. Remove the instrument panel assembly. Refer to VTL-14, "Removal and Installation".

2. Disconnect the intake door motor connector (1).

3. Remove the intake door motor screws (A) and remove intake door motor from the blower unit.

INSTALLATION

Installation is in the reverse order of removal.

    Fan control amplifier
    Removal and Installation The fan control amplifier is part of the blower motor. Refer to VTL-15, "Removal and Installation". ...

    Mode door motor
    Removal and Installation REMOVAL 1. Remove the combination meter. Refer to MWI-176, "Removal and Installation". 2. Remove the BCM (2). Refer to BCS-96, "Removal and Installation ...

    Other materials:

    B210F PNP/Clutch interlock switch
    Description IPDM E/R confirms the shift position with the following signals. • Park/neutral position (PNP) switch • Shift position signal from BCM (CAN) DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000 ...

    Service data and specifications (SDS)
    General Specifications TRANSAXLE FINAL GEAR End Play Baulk Ring Clearance Dimension Differential Side Bearing Preload Differential Side Gear Clearance ...

    P0776 pressure control solenoid B performance (sec pressure solenoid valve)
    Description The pressure control solenoid valve B (secondary pressure solenoid valve) regulates the secondary pressure to suit the driving condition in response to a signal sent from the TCM. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe ...