Nissan Altima (L32) 2007-2012 Service Manual ≻ Ventilation system ≻ On-vehicle repair ≻ Intake sensor

Nissan Altima (L32) 2007-2012 Service Manual: Intake sensor

Removal and Installation

REMOVAL

1. Remove the evaporator. Refer to VTL-20, "Removal and Installation".

2. Release the intake sensor clip and then remove the intake sensor.

CAUTION: • Mark the mounting position of the intake sensor.

• Do not damage the evaporator core.

INSTALLATION

Installation is in the reverse order of removal.

Sunload sensor

Removal and Installation REMOVAL 1. Remove the front RH speaker grille (1). Refer to AV-73, "Removal and Installation". 2. Disconnect the connector. 3. Release the sunload sensor ta ...

Heater & cooling unit assembly

Removal and Installation COMPONENTS 1. Steering member 2. Heater and cooling unit 3. Blower unit REMOVAL 1. Discharge the refrigerant from the A/C system. Refer to HA-24, "HFC-134a (R- ...

Other materials:

BSW system limitations
WARNING Listed below are the system limitations for the BSW system. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death. The BSW system cannot detect all vehicles under all conditions. The radar sensors may not be able to detect and ...

Continuously Variable Transmission (CVT)
WARNING Do not depress the accelerator pedal while shifting from P (Park) or N (Neutral) to R (Reverse), D (Drive), L (Low) or manual shift mode (if so equipped). Always depress the brake pedal until shifting is completed. Failure to do so could cause you to lose control and have an acciden ...

Brake system
The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels. Brake precautions Vacuum assisted brakes The brake booster aids braking by using engine vacuum. If the engine stops, you can stop the vehicle by depressing the brake pedal. H ...