Nissan Altima 2007-2012 Service Manual: Microphone
Removal and Installation
REMOVAL
1. Remove the room/map lamp assembly. Refer to INL-121, "Removal and Installation".
2. Detach the microphone connector (A).
3. Remove the map lamp covers (1), then remove the map lamp assembly cover (2).
4. Release the microphone tabs (A), then remove the microphone (1).
INSTALLATION
Installation is in the reverse order of removal.
Antenna AMP
Removal and Installation - Coupe REMOVAL 1. Remove the rear pillar finisher RH. Refer to INT-20, "Exploded View". 2. Detach the antenna amp harness clip (B), disconnect the antenna am ...TEL Antenna
Removal and Installation - Coupe REMOVAL 1. Remove the trunk front finisher, trunk floor carpet and spare tire cover. Refer to INT-22, "Exploded View". 2. Remove the LH trunk floor sp ...Other materials:
P0131 A/F Sensor 1
Description
The air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sensor.
The sensor element of the A/F sensor 1 is composed an electrode
layer, which transports ions. It has a heater in the element.
The sensor is capable of precise measurement = 1, but also in the
lean and r ...
The parking brake release warning continues
displaying, or does not
display
Description
• The parking brake warning is displayed while driving the vehicle even
though the parking brake is released.
• The parking brake warning is not displayed even though driving the vehicle
with the parking brake applied.
Diagnosis Procedure
1.CHECK PARKING BRAKE WARNING LAM ...
ECU Diagnosis
ECM
Reference Value
VALUES ON THE DIAGNOSIS TOOL
Remarks:
● Specification data are reference
values.
● Specification data are output/input
values which are detected or supplied by the ECM at the connector.
* Specification data may not be directly related to the ...