Nissan Altima 2007-2012 Service Manual: Nissan vehicle immobilizer systemnats symptoms
Symptom Table
Security indicator does not turn ON or flash.
CAUTION: • Follow Trouble Diagnosis Flowchart referring to “SEC-209, "Work Flow"”. Determine malfunctioning condition before performing this diagnosis.
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis.
• Check systems shown in the “Action” column in this order.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS) • Intelligent Key is not inserted into key slot.
• Engine switch is not depressed.
Vehicle security system symptoms
Symptom Table *: Check that the system is in the armed phase. ...Other materials:
Power window main switch
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
Wiring Diagram
Fail Safe
FAIL-SAFE CONTROL
Switches to fail-safe control when malfunction is detected in encoder signal
that detects up/down speed and
direction of door glass ...
B26e1 no reception of engine status signal
Description
BCM receives the engine status signal from ECM via CAN communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B26E1 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
SEC-36, "DTC Logic".
• If DTC B26E1 is displayed wit ...
P2138 APP Sensor
Description
The accelerator pedal position sensor is installed on the upper end
of the accelerator pedal assembly. The sensor detects the accelerator
position and sends a signal to the ECM.
Accelerator pedal position sensor has two sensors. These sensors
are a kind of potentiometers which tr ...