Nissan Altima 2007-2012 Service Manual: None of the power windows can be operated using any switch

Diagnosis Procedure

1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT

Check BCM power supply and ground circuit.

Refer to BCS-42, "Diagnosis Procedure".

Is the inspection result normal? YES >> GO TO 2

NO >> Repair or replace the malfunctioning parts.

2. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH POWER SUPPLY AND GROUND CIRCUIT

Check main power window and door lock/unlock switch power supply and ground circuit.

Refer to PWC-19, "POWER WINDOW MAIN SWITCH : Component Function Check".

Is the inspection result normal? YES >> GO TO 3

NO >> Repair or replace the malfunctioning parts.

3. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH

Check main power window and door lock/unlock switch.

Refer to PWC-19, "POWER WINDOW MAIN SWITCH : Component Function Check".

Is the inspection result normal? YES >> Inspection End.

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

    Driver side power window alone does not operate
    Diagnosis Procedure 1. CHECK POWER WINDOW MOTOR LH Check power window motor LH. Refer to PWC-25, "DRIVER SIDE : Component Function Check". Is the inspection result normal? YES >& ...

    Other materials:

    IPDM-E branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the IPDM E/R for damage, bend and loose connection (unit side and connector side). Is the in ...

    Recommended fluids and lubricants
    Fluids and Lubricants 1: For further details, see “Engine Oil Recommendation”. *2: Using automatic transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT, which is not covered by the NISSAN new vehicle limited warranty. *3: DEXRONTM VI type ATF or Canada NIS ...

    Oil filter
    Removal and Installation REMOVAL 1. Remove the oil filter using Tool. WARNING: • Be careful not to get burned, the engine and engine oil may be hot. CAUTION: • When removing, prepare a shop cloth to absorb any oil leakage or spillage. • Do not allow engine oil to adhere to the ...