Nissan Altima (L32) 2007-2012 Service Manual: None of the power windows can be operated using any switch
Diagnosis Procedure
1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit.
Refer to BCS-42, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 2
NO >> Repair or replace the malfunctioning parts.
2. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check power window switch main power supply and ground circuit.
Refer to PWC-303, "POWER WINDOW MAIN SWITCH : Component Function Check".
Is the inspection result normal? YES >> GO TO 3
NO >> Repair or replace the malfunctioning parts.
3. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH SERIAL CIRCUIT
Check main power window and door lock/unlock switch serial circuit.
Refer to PWC-303, "POWER WINDOW MAIN SWITCH : Component Function Check".
Is the inspection result normal? YES >> GO TO 4
NO >> Repair or replace the malfunctioning parts.
4. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
Check main power window and door lock/unlock switch.
Refer to PWC-303, "POWER WINDOW MAIN SWITCH : Component Function Check".
Is the inspection result normal? YES >> Inspection end.
NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
Driver side power window alone does not operate
Diagnosis Procedure 1. CHECK FRONT POWER WINDOW MOTOR LH Check front power window motor LH. Refer to PWC-313, "DRIVER SIDE : Component Function Check". Is the inspection result norm ...Other materials:
Oil
Maintenance of Oil Quantity in Compressor
The oil in the compressor circulates through the system with the refrigerant.
Add oil to compressor when
replacing any component or after a large refrigerant leakage has occurred. It is
important to maintain the specified
amount.
If oil quantity is ...
P0112, P0113 iat sensor
Description
The intake air temperature sensor is built-into mass air flow sensor
(1). The sensor detects intake air temperature and transmits a signal
to the ECM.
The temperature sensing unit uses a thermistor which is sensitive to
the change in temperature. Electrical resistance of the therm ...
RearView Monitor system operation
With the ignition switch in the ON position,
move the shift lever to the R (Reverse) position
to operate the RearView Monitor.
How to read the displayed lines
Guiding lines which indicate the vehicle
width and distances to objects with reference
to the vehicle body line A are displayed
on the monit ...