Nissan Altima 2007-2012 Service Manual: Occupant classification system control unit
Removal and Installation
The occupant classification system control unit, occupant classification system sensor, and sensor mat are an integral part of the front passenger seat cushion and are replaced as an assembly. Refer to SE-29, "PASSENGER SIDE : Disassembly".
Diagnosis sensor unit
Removal and Installation
REMOVAL
1. Diagnosis sensor unit harness connector
2. Diagnosis sensor unit shield
3. Diagnosis sensor unit
A. Diagnosis sensor unit bolts
CAUTION:
• Before servi ...
Collision diagnosis
For Frontal Collision
Check the SRS components using the following table.
• After the work is completed, perform self-diagnosis to check that no
malfunction is detected. Refer to SRC-
12, &q ...
Other materials:
B2555 stop lamp
Description
BCM detects the stop lamp status and confirms the stop lamp switch ON/OFF
status. BCM confirms the
engine start condition according to the stop lamp switch ON/OFF status.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Depress ...
Clearing the programmed information
The following procedure clears the programmed
information from both buttons. Individual buttons
cannot be cleared. However, individual buttons
can be reprogrammed. See “Reprogramming a
single HomeLink® button” in this section.
To clear all programming:
1. Press and hold the two outer Ho ...
Side curtain air bag module
Exploded View
1. Side curtain air bag module connector
2. Side curtain air bag module
A. Side curtain air bag module bolt
1. Side curtain air bag module
2. Side curtain air bag module
inflator
A. Side curtain air bag module bolt
Removal and Installation
REMOVAL
CAUTION:
• Before ...