Nissan Altima 2007-2012 Service Manual: On-vehicle maintenance

PRE-INSPECTION FOR DIAGNOSTIC

Basic Inspection

BASIC INSPECTION

1.INSPECTION START

1. Check the service history.

2. Check the following parts.

• Fuse/circuit breaker blown.

• Poor connection, open or short circuit of harness connector.

• Battery voltage.

Is the inspection result normal? YES >> Inspection End.

NO >> Repair or replace the malfunctioning parts.

    Power window lock switch does not function
    Diagnosis Procedure 1.REPLACE MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH Replace main power window and door lock/unlock switch. Refer to PWC-91, "Removal and Installation". After tha ...

    On-vehicle repair
    POWER WINDOW MAIN SWITCH Removal and Installation REMOVAL 1. Remove the power window main switch finisher (2). Refer to INT-12, "Removal and Installation". 2. Power window main swit ...

    Other materials:

    Moonroof (if so equipped)
    AUTOMATIC MOONROOF switch is placed in the ON position. The automatic moonroof is operational for a period of time, even if the ignition switch is placed in the ACC or OFF position. If the driver’s door or the front passenger’s door is opened during this period of time, the power to the ...

    BSW/LDW automatic deactivation
    When dirt, rain or snow cannot be removed by the automatic washer and blower and accumulates on the camera, making it impossible to detect the vehicles or the lane markers, the BSW and/or LDW system will be turned off automatically. The BSW light (white) and/or LDW light (white) will blink, ...

    U0140 Can comm circuit
    Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each co ...