Nissan Altima 2007-2012 Service Manual: On-vehicle maintenance

PRE-INSPECTION FOR DIAGNOSTIC

Basic Inspection

1.INSPECTION START

1. Check the service history.

2. Check the following parts.

• Fuse/circuit breaker blown.

• Poor connection, open or short circuit of harness connector.

• Battery voltage.

Is the inspection result normal? YES >> Inspection End.

NO >> Repair or replace the malfunctioning parts.

    Power window lock switch does not function
    Diagnosis Procedure 1.REPLACE MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH Replace main power window and door lock/unlock switch. Refer to PWC-186, "Removal and Installation". After th ...

    On-vehicle repair
    POWER WINDOW MAIN SWITCH Removal and Installation REMOVAL 1. Remove the power window main switch finisher (2). Refer to INT-34, "Removal and Installation". 2. Power window main swit ...

    Other materials:

    Power steering solenoid valve
    Description • Power steering solenoid valve controls the power steering oil pressure in the gear housing assembly. Diagnosis Procedure 1.CHECK POWER STEERING SOLENOID VALVE SIGNAL 1. Start engine. 2. Check voltage between power steering control unit harness connector M59 terminal 1 and ...

    P0441 evap control system
    DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0441 is displayed with other DTC such as P2122, P2123, P2127, P2128 or P2138, first perform trouble diagnosis for other DTC. In this evaporative emission (EVAP) control system, purge flow occurs during non-closed throttle conditions. Purge vo ...

    Can communication circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Disconnect all the unit connectors on CAN communication system. 4. Check terminals and connectors for damage, bend and loose con ...