Nissan Altima 2007-2012 Service Manual: On-vehicle maintenance

PRE-INSPECTION FOR DIAGNOSTIC

Basic Inspection

1.INSPECTION START

1. Check the service history.

2. Check the following parts.

• Fuse/circuit breaker blown.

• Poor connection, open or short circuit of harness connector.

• Battery voltage.

Is the inspection result normal? YES >> Inspection end.

NO >> Repair or replace the malfunctioning parts.

    Power window lock switch does not function
    Diagnosis Procedure 1. REPLACE MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH Replace main power window and door lock/unlock switch. Refer to PWC-291, "Removal and Installation". After t ...

    On-vehicle repair
    POWER WINDOW MAIN SWITCH Removal and Installation REMOVAL 1. Remove the power window main switch finisher (2). Refer to INT-12, "Removal and Installation". 2. Power window main sw ...

    Other materials:

    The low washer fluid warning continues displaying, or does not display
    Description • The warning is still displayed even after washer fluid is added. • The warning is not displayed even though the washer tank is empty. Diagnosis Procedure 1.CHECK WASHER LEVEL SWITCH SIGNAL CIRCUIT Check the washer level switch signal circuit. Refer to MWI-51, "Diagnosi ...

    Passenger seat belt warning system
    System Diagram System Description The seat belt warning lamp (1) will remind the driver if the driver or front passenger seat belt should be buckled. The system works in conjunction with the occupant classification system. Refer to SRC- 10, "Occupant Classification System (OCS)". ...

    Basic inspection
    DIAGNOSIS AND REPAIR WORK FLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1.GET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the “Diagnostic Work Sheet”. (Refer ...