Nissan Altima 2007-2012 Service Manual: On-vehicle maintenance

Function diagnosis
LUBRICATION SYSTEM Lubrication Circuit Schematic 1. Oil pan 2. Oil strainer 3. Oil pump 4. Regulator valve 5. Oil filter 6. Relief valve (Built in oil filter) 7. Oil cooler 8. Bypass 9. ...

Engine oil
Inspection OIL LEVEL • Before starting the engine, check the oil level. If the engine is already started, stop it and allow 10 minutes before checking. • Check that the oil level is within ...

Other materials:

B2603 shift position status
Description BCM confirms the shift position with the following 2 signals. • CVT selector lever • P/N position switch DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2603 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to SEC-235, "DTC Logic ...

Power distribution system
System Description INPUT/OUTPUT SIGNAL CHART SYSTEM DESCRIPTION • PDS (POWER DISTRIBUTION SYSTEM) is the system that BCM controls with the operation of the pushbutton ignition switch and performs the power distribution to each power circuit. This system is used instead of the mechanical ...

Key slot illumination
Description Blinks when keyfob insertion is required. Component Function Check 1.CHECK FUNCTION Check key slot illumination (“KEY SLOT ILLUMI”) Active Test mode. Is the inspection result normal? YES >> Key slot function is OK. NO >> Refer to SEC-505, "Diagnosis Pr ...