Nissan Altima (L32) 2007-2012 Service Manual: On-vehicle rep
BCM (BODY CONTROL MODULE)
Removal and Installation
REMOVAL
CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current
vehicle specification.
Refer to BCS-5, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description".
1. Remove the combination meter. Refer to MWI-176, "Removal and
Installation".
2. Remove the BCM screws (A), and pull out the BCM (1).
3. Disconnect the BCM connector and remove the BCM (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• When replacing BCM, perform "WRITE CONFIGURATION". Refer to BCS-6,
"CONFIGURATION (BCM)
: Description".
• When replacing BCM, perform the system initialization (NATS). Refer to the
CONSULT-III operation
manual for the initialization procedure.
• When replacing BCM, if new BCM does not come with keyfobs attached, all
existing keyfobs must be
re-registered. Refer to the CONSULT-III operation manual for the initialization
procedure.
Supplemental Restraint System (SRS) "AIR B
AG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used al ...
Precaution
Lan system can fundamental