Nissan Altima 2007-2012 Service Manual: On-vehicle repair

On-vehicle maintenance
FRONT WHEEL HUB Inspection • Move wheel hub and bearing assembly in the axial direction by hand. Make sure there is no looseness of wheel bearing. Axial end play : 0.05 mm (0.002 in) or less ...

Front wheel hub and knuckle
Removal and Installation 1. Cotter pin 2. Disc rotor 3. Wheel hub and bearing assembly 4. Splash guard 5. Steering knuckle REMOVAL 1. Remove wheel and tire from vehicle. Refer to WT-66, &qu ...

Other materials:

Antenna AMP
Removal and Installation - Coupe REMOVAL 1. Remove the rear pillar finisher RH. Refer to INT-15, "Removal and Installation". 2. Detach the antenna amp harness clip (B), disconnect the antenna amp connectors (A), remove the antenna amp screw (C) and remove the antenna amp (1). ...

Three-way catalyst
The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants. WARNING ● The exhaust gas and the exhaust system are very hot. Keep people, animals or flammable mater ...

Park/neutral position (PNP) switch
Exploded View 1. Washer 2. Manual lever 3. PNP switch 4. CVT assembly Removal and Installation Refer to the figure for removal and installation. NOTE: • Align PNP switch position when installing. • After installation of PNP switch, check the continuity of PNP switch. • Afte ...