Nissan Altima 2007-2012 Service Manual: On-vehicle repair
Oil filter
Removal and Installation
REMOVAL
1. Remove the oil filter using Tool.
Tool number : KV10115801 (J-38956)
WARNING:
• Be careful not to get burned, the engine and engine oil
may be hot.
CAUTION ...
Oil pump
Removal and Installation
• The oil pump is part of the front cover. For removal and installation of
the oil pump, it is necessary to remove
and install the front cover. Refer to EM-52, "Re ...
Other materials:
B2555 stop lamp
Description
BCM detects the stop lamp status and confirms the stop lamp switch ON/OFF
status. BCM confirms the
engine start condition according to the stop lamp switch ON/OFF status.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Depress ...
Function diagnosis
EPS SYSTEM
System Diagram
CONTROL DIAGRAM
System Description
• The EPS system controls the power steering solenoid valve through the power
steering control unit.
• The valve driving voltage to control the power steering solenoid
valve varies according to the vehicle speed.
OPERATI ...
B2014 chain of strg-immu
Description
BCM performs the ID verification with the steering lock unit to release the
steering. BCM starts the communication
with the steering lock unit when Intelligent Key is carried into the passenger
compartment and the pushbutton
ignition switch is pressed.
DTC Logic
DTC DETECTION L ...