Nissan Altima Owners Manual: Operating tips

CAUTION

● Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a cloth dampened with a diluted mild cleaning agent and then wipe with a dry cloth.

● Do not damage the camera as the monitor screen may be adversely affected.

● When the shift lever is shifted to R (Reverse), the monitor screen automatically changes to the RearView Monitor mode.

However, the radio can be heard.

● It may take some time until the RearView Monitor is displayed after the shift lever has been shifted to R (Reverse). Objects may be distorted momentarily until the RearView Monitor screen is displayed completely.

When the shift lever is returned to a position other than R (Reverse), it may take some time until the screen changes. Objects on the screen may be distorted until they are completely displayed.

● When the temperature is extremely high or low, the screen may not clearly display objects.

This is not a malfunction.

● When strong light directly enters the camera, objects may not be displayed clearly.

● Vertical lines may be seen in objects on the screen. This is due to strong reflected light from the bumper. This is not a malfunction.

● The screen may flicker under fluorescent light. This is not a malfunction.

● The colors of objects on the RearView Monitor may differ somewhat from those of the actual object.

● When the contrast of objects is low at night, pressing the SETTING button or MENU button may not change the brightness.

● Objects on the monitor may not be clear in a dark place or at night.

● If dirt, rain or snow attaches to the camera, the RearView Monitor may not display objects.

Clean the camera.

● Do not use body wax on the camera window.

If body wax does get on the camera window, wipe off the wax with a clean cloth dampened with mild detergent diluted with water.

    How to adjust the screen (if so equipped)
    settings, press the SETTING button while the RearView Monitor screen is displayed. Each time the SETTING button is pressed, the next setting item is selected. Turn the TUNE·SCROLL/TUNE·FOLDER co ...

    Rear and rear-wide view monitor with moving object detection (MOD) (if so equipped)
    When the shift lever is shifted into the R (Reverse) position, the monitor display shows view to the rear of the vehicle. The system is designed as an aid to the driver in detecting large statio ...

    Other materials:

    Vehicle Dynamic Control (VDC) system
    The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC System helps to perform the following functions: ● Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is tr ...

    Front door speaker (sedan)
    Description The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio signals before sending them to the front door speakers using the audio signal circuits. Diagnosis Procedure 1.HARNESS CHECK 1. Disconnect BOSE speaker amp. connector B121 and ...

    Push-button ignition switch positions
    LOCK (Normal parking position): The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key. The ignition switch will lock when any door is opened or closed with the ignition switche ...