Nissan Altima Owners Manual: Operating tips
● When the shift lever is shifted to R (Reverse), the monitor screen automatically changes to the RearView Monitor mode.
However, the radio can be heard.
● It may take some time until the RearView Monitor is displayed after the shift lever has been shifted to R (Reverse). Objects may be distorted momentarily until the RearView Monitor screen is displayed completely.
When the shift lever is returned to a position other than R (Reverse), it may take some time until the screen changes. Objects on the screen may be distorted until they are completely displayed.
● When the temperature is extremely high or low, the screen may not clearly display objects.
This is not a malfunction.
● When strong light directly enters the camera, objects may not be displayed clearly.
● Vertical lines may be seen in objects on the screen. This is due to strong reflected light from the bumper. This is not a malfunction.
● The screen may flicker under fluorescent light. This is not a malfunction.
● The colors of objects on the RearView Monitor may differ somewhat from those of the actual object.
● Objects on the monitor may not be clear in a dark place or at night. This is not a malfunction.
● If dirt, rain or snow attaches to the camera, the RearView Monitor may not display objects.
Clean the camera.
● Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration.
To clean the camera, wipe with a cloth dampened with diluted mild cleaning agent and then wife with a dry cloth.
● Do not damage the camera as the monitor screen may be adversely affected.
● Do not use wax on the camera window.
Wipe off the wax with a clean cloth dampened with mild detergent diluted with water.
How to adjust the screen
To adjust the Display ON/OFF, Brightness, Tint,
Color, Contrast and Black Level of the RearView
Monitor, press the SETTING button with the
RearView Monitor on, select the item key and
adjust the l ...
Moving Object Detection (MOD) (if so equipped)
The Moving Object Detection (MOD) system can
inform the driver of moving objects behind the
vehicle when backing out of garages, maneuvering
in parking lots and in other such instances.
The MOD ...
Other materials:
B2601 shift position
Description
BCM confirms the shift position with the following 2 signals.
• CVT selector lever
• P position signal from IPDM E/R (CAN)
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2601 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
SEC-36 ...
B1xxx air bag diagnosis sensor unit
Description
DTC B1XXX AIR BAG DIAGNOSIS SENSOR UNIT
The air bag diagnosis sensor unit will run self diagnostics when the ignition
switch is turned ON. It has the
potential to set many diagnostic trouble codes which will conform to the B1XXX
format, but will not match any
other SRS diagnosti ...
Regulatory Information
FCC Regulatory information
– CAUTION: To maintain compliance with
FCC’s RF exposure guidelines, use only the
supplied antenna. Unauthorized antenna,
modification, or attachments could damage
the transmitter and may violate FCC regulations.
– Operation is subject to the following two cond ...