Nissan Altima (L33) 2013-2018 Owners Manual: Owner’s Manual/Service Manual order information
Genuine NISSAN Service Manuals for this model year and prior can be purchased. A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle.
This manual is the same one used by the factorytrained technicians working at NISSAN dealerships.
Genuine NISSAN Owner’s Manuals can also be purchased.
For USA
For current pricing and availability of genuine NISSAN Service Manuals, contact:
1-800-450-9491
www.nissan-techinfo.com
For current pricing and availability of genuine NISSAN Owner’s Manuals, contact:
1-800-247-5321
For Canada
To purchase a copy of a genuine NISSAN Service Manual or Owner’s Manual, for this model year and prior, please contact your nearest NISSAN dealer. For the phone number and location of a NISSAN dealer in your area, call the NISSAN Information Center at 1-800-387-0122 and a bilingual NISSAN representative will assist you.
Event Data Recorders (EDR)
This vehicle is equipped with an Event Data Recorder
(EDR). The main purpose of an EDR is to
record, in certain crash or near crash-like situations,
such as an air bag deployment or hitting a
road ...
Other materials:
P0011 IVT Control
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P0011 is displayed with DTC P0075, first perform the trouble diagnosis
for EC-867, "DTC Logic".
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always turn
ignition switch OFF ...
P2138 APP sensor
Description
The accelerator pedal position sensor is installed on the upper end
of the accelerator pedal assembly. The sensor detects the accelerator
position and sends a signal to the ECM.
Accelerator pedal position sensor has two sensors. These sensors
are a kind of potentiometers which tra ...
Hood
1 Pull the hood lock release handle located
below the driver’s side instrument panel; the
hood springs up slightly.
2 Push the lever at the front of the hood to the
side as illustrated with your fingertips and
raise the hood.
3 Remove the support rod from the clamp.
4 Insert the support r ...
