Nissan Altima Owners Manual: Park/turn signal lights
1. Disconnect the negative battery cable.
2. Remove the fasteners A ; carefully pull back the front fender protector.
3. Rotate the bulb B counterclockwise and pull out to remove.
Fog lights (if so equipped)
1. Disconnect the negative battery cable. 2. Remove the fasteners A ; carefully pull back the front fender protector . 3. Rotate the bulb B counterclockwise and pull out to remove. Reverse st ...Exterior and interior lights
*1 Always check with the Parts Department at a NISSAN dealer for the latest parts information. *2 See a NISSAN dealer for assistance. 1. Front map light 2. Headlamp assembly 3. Park/ Turn si ...Other materials:
Vehicle phonebook
To access the vehicle phonebook:
1. Press the button on the
control panel.
2. Select the “Phonebook” key.
3. Choose the desired entry from the displayed
list.
4. The number of the entry will be displayed on
the screen. Touch the number to initiate dialing.
NOTE:
To scroll quickly th ...
B210D starter relay
Description
Located in IPDM E/R, it runs the starter motor. The starter relay is turned
ON by the BCM when the ignition
switch is in START position. IPDM E/R transmits the starter relay ON signal to
BCM via CAN communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B210D is display ...
Power steering solenoid valve
Description
• Power steering solenoid valve controls the power steering oil pressure in
the gear housing assembly.
Diagnosis Procedure
1.CHECK POWER STEERING SOLENOID VALVE SIGNAL
1. Start engine.
2. Check voltage between power steering control unit harness connector
M59 terminal 1 and ...